View MPD6D104S_4920833.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it? s specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical specifications because there is no space for detailed specifications. therefore, please appr ove our product specifications or transact the approval sheet for product specifications before orderin g . 2010.5.7 mpd6d10*s specification 1 dc-dc converter specification mpd6d10 * s 1 . application this specification applies to dc-dc converter mpd6d10*s(*:1 ?` 9) for telecommunication / data-communication equipment. for any other application, please contact us before using this product. 2 . customer reference customer spec. number customer part number 3 . customer & murata part number nominal output voltage customer part number part number 12.0v mpd6d101s 1.2v mpd6d102s 1.5v mpd6d103s 1.8v MPD6D104S 2.0v mpd6d105s 2.5v mpd6d106s 3.3v mpd6d107s 5.0v mpd6d108s 5.2v mpd6d109s
note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it? s specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical specifications because there is no space for detailed specifications. therefore, please appr ove our product specifications or transact the approval sheet for product specifications before orderin g . 2010.5.7 mpd6d10*s specification 2 4 . appearance, dimensions marking part number mpd6d10_s murata cm mark lot number 1) factory symbol 2) the last number of production year. example:2 stands for 2002 3) production month. example:1 stands for january 9 stands for september o stands for october n stands for november d stands for december 4) 5) 6) revision (no first edition) : : 01, 02, 03, 04, 05, 06, 07, 08,109 which is _ _ of mpd6d1 _ _s 1.5?}0.2 1.3?}0.3 0.25?}0.1 0?`10?? ?? 0.55 +0.1 -0.15 enlarged pin shape unit:mm mpd6d1 ?@s 4p p p p p 22.4?}0.5 1.04?}0.5 cus 10.3?}0.2 37.3?}0.5 mark (where close to 1pin) 123 4 5 9 5 4 3 2 1 10 11 12 13 14 15 16 17 18 p=2.54?}0.2 tolerance is not accumulated. 4.2max 39.9?}0.6 coplanarity 0.1mm max
note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it? s specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical specifications because there is no space for detailed specifications. therefore, please appr ove our product specifications or transact the approval sheet for product specifications before orderin g . 2010.5.7 mpd6d10*s specification 3 drive +vin po rc alm control ic -vin +vout -vout 16 3 2 1 11 12 13 drive filter 15 17 18 5 4 5 . pin number and function pin no pin symbol function 910, nco mechanical supplemental contact pins. pins at the four corners on printed circuit board. to contact dc-dc converter mounted board with thermal setting resin. 1 +vout (+)output 2 +vout (+)output 3 +vout (+)output 4 -vout ( - )output 5 -vout ( - )output 11 alm alarm output 12 rc remote on/off control 13 po parallel operation 14 nc - 15 +vin ( + )input 16 +vin ( + )input 17 -vin ( - )input 18 -vin ( - )input 6. block diagram 6.1 entire product
note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it? s specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical specifications because there is no space for detailed specifications. therefore, please appr ove our product specifications or transact the approval sheet for product specifications before orderin g . 2010.5.7 mpd6d10*s specification 4 7. environmental conditions 7 .1. operating temperature range -40c ~ +85c (with power derated.) 7 .2. operating humidity range 20% ~ 85% ?i no water condenses. ?j 7 .3. storage temperature range -45c ~ +90c 7 .4. storage humidity range 10% ~ 95%( no water condenses.) 8. absolute rating item unit absolute rating remarks minimum input voltage v 0 continuous v 75 maximum input voltage alm applied voltagerc applied voltage time 200s v 90 slew rate 42v/10s po applied voltage v 8 maximum alm sink current ma 10 no voltage, no matter how instantaneous, shall be applied beyond the absolute maximum voltage rating to this product. if you apply any voltage over this limit, the product charac teristics will deteriorate or the product itself will be destroyed. even though it may continue operating for a while after the over-voltage event, its life will likely be shortened significantly. reliability and life of the module may degrade similarly if the maximum operating voltage rating is continuously exceeded. this product is designed to operate within the maximum operating voltage rating specification. 9. characteristics 9 .1. electrical characteristics (ta=25c) 9 .1 .1. general characteristics unless otherwise specified, (ta= -40 to +85c with power derated.) items unit value remark rated input voltage v 48 36 to 60 no powerderating with 0.2m/s(40lfm) 36 to 75 no powerderating with 0.5m/s(100lfm). input voltage range v 36 to 75 powerderating with 0m/s(0lfm) turn-on input voltage v 32.0 to 36.0 hysterisis voltage v minimum 2 input voltage difference between turn-on and turn-off galvanic isolation voltage vdc minimum 1500 for one minute between input and output emc (radiated emi / conduction) in accordance with cispr publication22,class a (vcci class a) safty standards ul60950(ul / c-ul) recognized ce marking attached self-declaration
note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it? s specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical specifications because there is no space for detailed specifications. therefore, please appr ove our product specifications or transact the approval sheet for product specifications before orderin g . 2010.5.7 mpd6d10*s specification 5 9 .1 .2. specific characteristics (ta= -40 to +85c with power derated.) mpd6d_ _ _s where _ _ _ is in below cells. models items 101 102 103 104 105 106 107 108 109 unit nominal output voltage 12.0 1.2 1.5 1.8 2.0 2.5 3.3 5.0 5.2 v output voltage regulation vin =36 to 75v output current range = 0 to 100% +5%,-3% % nominal output current 0.8 3.5 3.5 3.0 3.0 3.0 3.0 2.0 2.0 a output current-limit inception min 0.82 3.60 3.60 3.10 3.10 3.10 3.10 2.06 2.06 a over voltage protection : note 1 min 14.4 1.44 1.80 2.16 2.40 3.00 3.96 6.00 6.24 v low voltage protection :note 2 max 10.8 1.08 1.35 1.62 1.80 2.25 2.97 4.50 4.68 v efficiency(typ.) ta=25 c , vin = 48v, nominal output current 88 79 82 86 86 88 89 89 89 % output ripple and noise max note 3 50 100 mvp-p output ripple max note 3 25 50 mvp-p note 1: output halted in latch-up mode after mask time 0.5ms(typ.), which prevents dc-dc converter from malfunction by external noise and/or transient output voltage change. note 2: output halted in latch-up mode after mask time 500ms(typ.), which prevents dc-dc converter from malfunction by external noise and/or transient output current change. note 3: refer to 10.measure construction.
note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it? s specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical specifications because there is no space for detailed specifications. therefore, please appr ove our product specifications or transact the approval sheet for product specifications before orderin g . 2010.5.7 mpd6d10*s specification 6 9.1.3. .typical power derating of mpd6d101s to mpd6d109s nominal output currents are attainable with 0.5m/s(100lfm),vin=36to75v or 0.2m/s(40lfm ),vin=36to60v. powerderatings are required under 0m/s(0lfm),vin=36to75v. mpd6d102s (vo=1.2v) 0 0.5 1 1.5 2 2.5 3 3.5 4 -40 0 40 80 ambient temperature [ ?? ] output current [a] 0.5m/s or 0.2m/s 0m/s 65 ?? 2.3a 85 ?? mpd6d103s (vo=1.5v) 0 0.5 1 1.5 2 2.5 3 3.5 4 -40 0 40 80 ambient temperature [ ?? ] output current [a] 0.5m/s or 0.2m/s 0m/s 65 ?? 2.3a 85 ?? MPD6D104S (vo=1.8v) 0 0.5 1 1.5 2 2.5 3 3.5 4 -40 0 40 80 ambient temperature [ ?? ] output current [a] 0.5m/s or 0.2m/s 0m/s 65 ?? 2.0a 85 ?? mpd6d106s (vo=2.5v) 0 0.5 1 1.5 2 2.5 3 3.5 4 -40 0 40 80 ambient temperature [ ?? ] output current [a] 0.5m/s or 0.2m/s 0m/s 65 ?? 2.0a 85 ?? mpd6d101s (vo=12v) 0 0.2 0.4 0.6 0.8 1 -40 0 40 80 ambient t emperature [ ?? ] output current [a] 0.5m/s or 0.2m/s 0m/s 65 ?? 0.5a 85 ?? mpd6d105s (vo=2.0v) 0 0.5 1 1.5 2 2.5 3 3.5 4 -40 0 40 80 ambient temperature [ ?? ] output current [a] 0.5m/s or 0.2m/s 0m/s 65 ?? 2.0a 85 ??
note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it? s specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical specifications because there is no space for detailed specifications. therefore, please appr ove our product specifications or transact the approval sheet for product specifications before orderin g . 2010.5.7 mpd6d10*s specification 7 9.2. operation information 9.2.1. reset condition in order to reset all function , the input voltage (vin) is set under 5v for 1s. min. vin 36 to 75v reset condition 5v min 1s.min mpd6d107s (vo=3.3v) 0 0.5 1 1.5 2 2.5 3 3.5 4 -40 0 40 80 ambient temperature [ ?? ] output current [a] 0.5m/s or 0.2m/s 0m/s 65 ?? 2.0a 85 ?? mpd6d108s (vo=5.0v) 0 0.5 1 1.5 2 2.5 3 3.5 4 -40 0 40 80 ambient t emperature [ ?? ] output current [a] 0.5m/s or 0.2m/s 0m/s 65 ?? 1.3a 85 ?? mpd6d109s (vo=5.2v) 0 0.5 1 1.5 2 2.5 3 3.5 4 -40 0 40 80 ambient t emperature [ ?? ] output current [a] 0.5m/s or 0.2m/s 0m/s 65 ?? 1.3a 85 ??
note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it? s specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical specifications because there is no space for detailed specifications. therefore, please appr ove our product specifications or transact the approval sheet for product specifications before orderin g . 2010.5.7 mpd6d10*s specification 8 9.2.2. over voltage protection (ovp) the isolated dc-dc converter become into latch-up mode after typical 0.5ms. mask time,when the output voltage is over the value specified in over voltage protection(9.1.2) by failure of internal control circuit. in order to reset, the input voltage is set under 5v for 1s. min. output voltage might exceed the point at which ovp starts to function under the specific condition of transient input voltage or output current change. therefore,ovp is set to wait for the mask time 0.5ms. it is recommended to evaluate your appliances installed with the dc-dc converter. 9.2.3. low voltage protection (lvp) the isolated dc-dc converter becomes into latch-up mode after typical 500ms. mask time,when the output voltage is under the value specified in low voltage protection(9.1.2) by operating over current-limit inception due to failur e of internal control or over load. in order to reset, the input voltage is set under 5v for 1s. min. 9.2.4. remote on/off control the connection to a rc pin controls an isolated dc-dc converter to turn on/off. while the isolated dc-dc converter is halted under the remote control, alarm function does not operate;refer to alarm output. start : rc is open or connected to -vin halt : rc is connected to +vin 9.2.5. alarm output (alm) the alarm output can be down to the level of -vin (open drain output), when over voltage protection or low voltage protection operates. sink current in alm pin is 10ma max. the isolated dc-dc converter running for multiple and/or parall el operation are enable to simultaneously halt by connecting all alm pins, in the case of over vo ltage protection or low voltage protection caused by any single dc-dc converter. maximum number running dc-dc converters is 10pcs. to connect more than 10,please consult murata. vin 36 to 75v reset condition 5v min 1s.min vin 36 to 75v reset condition 5v min 1s.min
note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it? s specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical specifications because there is no space for detailed specifications. therefore, please appr ove our product specifications or transact the approval sheet for product specifications before orderin g . 2010.5.7 mpd6d10*s specification 9 9.2.6. synchronous turn-on/off the isolated dc-dc converters running for multiple and / or parallel operation are enable to synchronize turn-on/off timing among the running converters, of which the input voltage detection circuits are unified to the detection voltage of a certain isolated dc-dc converter. every po pin is necessary to be connected for multiple and/or parallel operation. maximum number running dc-dc converters is 10pcs.to connect more than 10,please consult murata. 9. 3. reliability 9.3.1. humidity test parts are subjected to a temperature 40c ?} 2c with 90 ?` 95% for 100 hours. return the parts to room temperature (25c) for 4 hours and measure. the initial values under item 9.1. should be met. (jis-c-0022) 9.3.2. thermal cycle test parts are subjected to 5 cycle of the following. the parts are placed in room temp erature (25c) for 2 h ours and are measured. the initial values under item 9.1. should be met. step condition time 1 -40 ?} 3c 30 minutes 2 room temp. 5 ?` 10 minutes 3 +85 ?} 3c 30 minutes 4 room temp. 5 ?` 10 minutes 9.3.3. vibration 10 to 55hz, 1.5mm amplitude, 1 hour for each each of x,y,z directions. no damage in appearance and no deviation from electrical characteristics(9.1.). 9.3.4. mechanical shock 20g, 1 time for each x,y,z directions. no damage in appearance and no deviation from electrical characteristics(9.1.). 9.3.5. soldering heat resistance immerse the part of lead where it is to be soldered on a motherboard in a solder bath of 260 ?} 5c for 3 ?} 0.5s. then tested products are left for 2 hours. there is no damage in appearance and no deviation from electrical characteristics in clause 9.1. 9.3.6. lead pin strength strain a lead pin by gradual-increasingly 5.0n along axial direction; withstand for 5s. no damage on a lead pin. 9.3.7. solderability of leads the lead pins will be immersed in the isopropyl alcohol (jis k 1522) with rosin (jis k 5902) solution (the concentration of rosin will be allowed 10wt% to 35wt%, and normally approx.25wt% will be used without any specific requirement.). then the lead pins will be immersed in the solder h63a (jis z 3282) solution at the temperature of 230c ?} 5c for 3 ?} 0.5seconds, and pulled up completely. the solder will adhere to over 75% of immersed area.
note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it? s specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical specifications because there is no space for detailed specifications. therefore, please appr ove our product specifications or transact the approval sheet for product specifications before orderin g . 2010.5.7 mpd6d10*s specification 10 10. measure construction 10.1. standard test circuit 10.1.1. output ripple & noise isolated dc-dc converte r v ein a ein : stabilized dc power suppl y : multimete r rl : electronic or resistive load v a oscilloscope v a rl +in +ou t -in -out ein oscilloscope f bw :500mhz coaxial cable:1.5d-2v(refer to jis c3501) ,1.5m length feedthru- termination trc-50f by keisoku giken equivalent schematic r : 50 ?? c : 0.01 f c=10 f ceramic capacitor ceramic capacitor :10 f (connected output pins) coaxial cable in out b a a : output ripple & noise b: output ripple c: switching period c
note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it? s specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical specifications because there is no space for detailed specifications. therefore, please appr ove our product specifications or transact the approval sheet for product specifications before orderin g . 2010.5.7 mpd6d10*s specification 11 11. packaging information 11.1. tray dimensions dc-dc converters are put in the trays. p1 274.5 300.0 10.0 a- a a p1 p1 p1=38.0 p1 174.5 p2 200.0 c p1 36.0 46.0 p 2 = 54 .0 a c c-c unit : mm general tolerance +/-1.5
note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it? s specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical specifications because there is no space for detailed specifications. therefore, please appr ove our product specifications or transact the approval sheet for product specifications before orderin g . 2010.5.7 mpd6d10*s specification 12 11.2. maximum pieces per a tray. 21pcs/tray(except less than 21) 11.3. package corrugated cardboard box contains trays with products. tray is heaped with alternately opposite direction to prevent products from contacting against the bottoms of trays. numerals in parentheses are reference only. corrugated cardboard box label unit : mm label ; written by : part number, : quantity, : inspection number, : ce marking. trays containing products bottom sheet of corrugated cardboard dummy tray
note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it? s specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical specifications because there is no space for detailed specifications. therefore, please appr ove our product specifications or transact the approval sheet for product specifications before orderin g . 2010.5.7 mpd6d10*s specification 13 12. notice 12.1. soldering 12.1.1. flux please solder this product with rosin flux, which contains of 0.2wt%. or less chlorine. please do not use high activity acid flux or water soluble flux because they may erode metal or glass portion of this product and may cause defe ctiveness or deterioration of this product. 12.1.2. solder please use the solder h60, h63(jis z3282)or the equivalent type. please use the solder paste of equivalent type h60, h63. 12.1.3. condition of soldering reflow solder reflow soldering profiles jedec ipc/jedec j-std-020d table 5-2 classification reflow profiles pb-free assembly large body profile details soldering temperature ?f 245 oc +0/-5 soldering time ?f 30 seconds,240 ?` 245 oc heating time ?f 60 ?` 150 seconds,217 oc or more. preheating time ?f 60 ?` 120seconds,150 ?` 200 oc programming rate ?f 3 oc /sec.max.,217 ?` 245 oc descending rate ?f 6 oc /sec.max. total soldering time ?f 8 minutes max.,25 ?` 245 oc time ?f max 2 times. do not give vibration or an airing to product while solder melts under reflow process. please wait for products cooled down enough. there is the possibility that products which are mounted on back side of motherboard may fall down from the motherboard while reflow process. recommend to use supplemental mechanical contact to pins where is located at four corners, by other adhesive methods, for example, a thermal setting resin, rather than soldering. 12.2. cleaning 12.2.1. please clean the products to remove flux by using the dip, boil, and vapor methods in isopropyl alcohol for up to 5 minutes. please inform us if you are to use aqueous or semi-aqueous cleaning or other methods. do not use ultrasonic cleaning because semiconductor device on the products may be damaged by resonance. 12.2.2. after cleaning, please dry the products thoroughly. if you touch the wet products ,the marking on the products may be erased or blurred. do not measure electrical characteristics, until the products get dried enough. 12.2.3. if you don?t clean the products with no-cleaning type flux, you must confirm the reliability of the products fully in advance. i so l a t ed d c -d c co nv e rt er motherboard
note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it? s specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical specifications because there is no space for detailed specifications. therefore, please appr ove our product specifications or transact the approval sheet for product specifications before orderin g . 2010.5.7 mpd6d10*s specification 14 12.3. storage 12.3.1. please store the products in room where the temperature/humidity is stable and direct sunlight cannot come in ,and use the products within 6 months after delivery. avoid damp heated places or such places where there are large tem perature changes, because water may condense on the products, the characteristics may be r educed in quality, and/or be degraded in the solderability. if you store the products for a long time (more than 1 year), use caution because the products may be degraded in the solderability and/or rusty. please confirm solderability and characteristics for the products regularly. 12.3.2. please do not store the products in the places such as : in a dusty place, in a place exposed directly to sea breeze, in a place in an atmosphere containing corrosive gas (cl 2 , nh 3 , so 2 , no x and so on). 12.4. operation environment and conditions 12.4.1. operation environment the products are not waterproof, chemical-proof or rusts proof. in order to prevent leakage of products and abnormal temperature increase of the products, do not use the products under the following circumstances: (1) in an atmosphere containing corrosive gas (cl 2 , nh 3 , so 2 , no x and so on) (2) in a dusty place (3) in a place exposed to direct sunlight (4) in such a place where water splashes or in such a humid place where water condenses. (5) in a place exposed to sea breeze (6) in any other places similar to the above (1) through (5) 12.4.2. operation conditions please use the products within specified values (power supply, temperature, input, output and load condition, and so on). if you use the products over the specified values, it may break the products, reduce the quality, and even if the products can endure the condition for short time, it may cause degradation of the reliability. to insert fuse into input or vin is recommended to secure safety in any abnormality such as internal isolated dc-dc converter circuit broken down. please do not apply more voltage than one?s rated output from external circuit to output pins. 12.4.3. handling if you apply high static electricity over rated voltage or reverse voltage to the products, it may cause defects in the products or degrade the reliability. please avoid the following items : (1) over rating voltage apply, reverse voltage apply under measurement or not-enough connection of 0 v(dc) line (2) electrostatic discharge by production line and/or operators (3) electrified appliances by electrostatic induction do not give an excessive mechanical shock. if you drop the products on the floor, etc., it may crack the core of inductors and monolithic ceramic capacitors. do not give strong shocks such as drops in handling. flexibility of products is limited up to 0.2mm as bending the substrate
note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it? s specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical specifications because there is no space for detailed specifications. therefore, please appr ove our product specifications or transact the approval sheet for product specifications before orderin g . 2010.5.7 mpd6d10*s specification 15 12.5. transportation if you transport the products, please wrap-up in addition to the standard package. otherwise mechanical vibrations or mechanical shocks, may damage the package and please direct transporters to handle with care. if you transport the pr oducts to overseas (in particular, by sea), it is expected that the transportation environment will be the worst. so please pack the products, in the package designed on the consideration of mechanical strength, vibration-resistant and humidity-resistant. the package of the products, which murata sells in japan, may not resist over seas transport. please consult us if you are to use the standard package of the products sold in japan for transport to overseas. 13. production factories komatsu murata mfg.co.,ltd. wakura murata mfg.co.,ltd. kanazu murata mfg.co.,ltd. note 1. against an unlikely event by abnormality or trouble of products, please give appropriate fail-safe function to it to prevent secondary disaster. 2. please contact our sales representatives or pr oduct engineers before using our products for the applications listed below which require especially hi gh reliability for the prevention of defects which might directly cause damage to the third party's life, body or property. 1. aircraft equipment 2. aerospace equipment 3. undersea equipment 4. atomic power plant equipment 5. medical equipment 6. transportation equipment (vehicles, trains, ships, etc.) 7. traffic signal equipment 8. disaster prevention / crime prevention equipment 9. data-processing equipment 10. application of similar complexity and/or reliability requirements to the applications listed in the above. request to customer 1. please evaluate the products mounted on your appliance. 2. contents specified in the document are based on the preconditions of the purpose, condition and environment to which murata has agreed with customers. please do not use the products deviated from application described in the specification. 3. please return two specifications with stamped or signature for your receipt. we consider it not appropriate to include other terms and conditions for transaction warranty in product specifications, drawings or other techni cal documents. therefore, if your technical documents as above include such terms and conditions as warranty clause, product liability clause, or intellectual property infringement liability clause, we will not be able to accept such terms and conditions unless they are based on the governmental regulation or they are stated in a separate contract agreement. the document is for reference only and is subject to revision without notices. please contact murata for formal documentation.

▲Up To Search▲

Price & Availability of MPD6D104S

	To Download MPD6D104S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .